TM 9-2320-209-20-3-2 FRAME 3 1. 2. NOTE If four plastic ties holding brake lines on torque rods were taken off, put on new plastic ties. Put four clamps Using 7/16-inch (1) holding two brake lines (2) on two upper torque rods (3). wrenches, screw on and tighten four capscrews (4) and four nuts (5). NOTE Follow-on Maintenance Action Required: 1. Replace left side spring saddle. Refer to para 17-8. 2. Replace all rear wheels. Refer to TM 9-2320-209-10. 3. Lower rear axle housings. Refer to para 11-3. END OF TASK 17-68