TM 9-2320-209-20-3-2 FRAME 2 1. Put handbrake lever assembly (1) in place on floorboard in cab. Line up screw holes. 2. Put screw (2) through bracket (3) and floorboard and reach under cab and start nut (4) on screw. Using 9/16-inch wrench, hold nut. Using 9/16-inch socket wrench, tighten screw into nut. 3. Put bracket (5) under cab with yoke (6) coming up through floorboard. With studs (7) lined with holes in floorboard, start nuts (8) on studs (7). 4. Using 9/16-inch socket wrench, tighten nuts (8). GO TO FRAME 3 13-41