TM 9-2320-209-20-3-2 b. Removal. FRAME 1 Soldier A 1. Using 3/8-inch wrenches and screwdriver, unscrew and take off four capscrews (1) and nuts (2). Spread open and take off four clamps (3) holding two brake lines (4) on two upper torque rods (5). NOTE On some trucks, there may be plastic ties holding two brake lines (4) to upper torque rods (5). Using diag- onal cutting pliers, cut off four ties. 2. Using 1 7/16-inch socket wrench, unscrew two nuts (6) until outer side of nut is even with end of upper torque rod end (7). 3. Hold end of steel punch against end of upper torque rod end (7). 4. Using sledge hammer, hit end of punch to loosen upper torque rod end (7). 5. Using 1 7/16-inch socket wrench, unscrew and take off two nuts (6). Soldier B Soldier A GO TO FRAME 2 17-62