TM 9-2320-209-20-3-2 FRAME 4 1. Pack cover (1) with grease. Grease both sides of gasket (2). Put gasket on cover, lining up screw holes. 2. Put cover (1) with gasket (2) onto spring seat (3), lining up screw holes. Using (5). 3. Using 4. Using 1/2-inch wrench, screw in and tighten six lockwashers (4) and screws torque wrench, tighten screws (5) to 16 to 20 pound-feet. rag, clean off any grease that squeezed out. 5. Jack up cross shaft until spring seat (3) just touches spring (6). GO TO FRAME 5 17-55