TM 9-2320-209-20-3-2 FRAME 5 1. Put saddle (1) onto spring (2). Make sure saddle is down on spring. Put U-bolts (3) over saddle and down into spring seat (4). 2. Put lockwashers (5) and screw nuts (6) onto U-bolts (3). 3. Lower jacks (7) from spring (2) and take jacks away. 4. Using torque wrench, tighten nuts (6) to 180 to 230 pound-feet. NOTE Follow-on Maintenance Action Required: 1. Replace rear wheels. Refer to TM 9-2320-209-10. 2. Lower and take away jacks under cross shaft and axle housing. Refer to Part 1, para 11-3. END OF TASK 17-45