TM 9-2320-209-20-3-2 c. Cleaning, Inspection, and Repair. FRAME 1 WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when sol- vent is used. Use only in well-ventilated places. Fail- ure to do this may result in injury to personnel and damage to equipment. NOTE Only the longest three leaves of spring may be replaced. Throw away any spring that has other leaves damaged. 1. Clean all parts with solvent. Check all spring leaves in spring assembly (1) for cracks and breaks. Check four spacers (2) and four clips (3) for damage or wear. 2. Using wire brush, clean off any rust or corrosion on spring leaves in spring (1). 3. Throw away damaged parts. Get new parts in their place. END OF TASK 17-35