TM 9-2320-209-20-3-2 17-7. REAR LEAF SPRING ASSEMBLY REPAIR. TOOLS: File Wire brush 9/16-inch wrench (2) Ballpeen hammer 11/16-inch wrench (2) C-clamp SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Powdered graphite, SS-G-659A PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Jack up and support truck. Refer to Part 1, para 11-3. (2) Remove rear leaf spring from truck. Refer to para 17-6. NOTE Only the longest three leaves of spring may be replaced. Throw away any spring that has other leaves damaged. b. Disassembly. FRAME 1 1. Using file, file off peened over ends of four screws (1). GO TO FRAME 2 17-33