TM 9-2320-209-20-3-2 FRAME 2 1. 2. 3. WARNING Spring is heavy. Make sure spring does not fall and cause injury to personnel and damage to equipment. Put spring (1) in place so spring seat (2) is in middle of spring and spring is down on spring seat. Put saddle (3) on spring (1). Put U-bolts (4) over saddle and through spring seat (2) in two places. Put lockwashers (5) and nuts (6) on U-bolts (4) in two places. Using torque wrench, tighten nuts to 190 to 230 pound-feet. NOTE Follow-on Maintenance Action Required: 1. Replace wheels. Refer to TM 9-2320-209-10. 2. Jack up truck. Take safety jacks away. Jack truck down. Refer to Part 1, para 11-3 END OF TASK 17-32