TM 9-2320-209-20-3-2 FRAME 2 1. Put retainer (1) and rubber bushing (2) on screw end of shock absorber (3). Pull screw end of shock absorber down into hole in plate (4). 2. Put on rubber bushing (5) and retainer (6). Using strap wrench, hold shock absorber (3). Using 5/8-inch wrench, screw on and tighten nut (7). Using 5/8-inch wrenches, hold nut (7) and screw on and tighten nut (8). NOTE Follow-on Maintenance Action Required: Take out safety jacks. Jack truck down. Refer to Part 1, para 11-3. END OF TASK 17-28