TM 9-2320-209-20-3-2 c. Cleaning, Inspection, and Repair. FRAME 1 1. 2. 3. 4. 5. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when sol- vent is used. Use only in well-ventilated places. Fail- ure to do this may result in injury to personnel and damage to equipment. Using wire brush, clean off Clean all parts in solvent. Check that all parts are not way. any dirt, rust or corrosion. cracked, worn, broken, or damaged in any other If spring eye sleeve bearings (1) or shackle pin or damaged, using arbor press, press them out. Throw away any worn or damaged parts and get sleeve bearing (2) are worn Get new ones in their place. new ones in their place. END OF TASK 17-20