TM 9-2320-209-20-3-2 FRAME 5 1. 2. 3. From inside of truck frame (1), put piece of clamp part (2) through hole with handbrake cable (3). Slide clamp part onto truck frame. Put other clamp part (4) onto handbrake cable (3), lining up screw holes in clamp parts (2 and 4). Handbrake cable must be between clamp parts. Put two screws (5) through clamp parts (2 and 4). Using 7/16-inch wrenches, screw on and tighten nut (6). NOTE Follow-on Maintenance Action Required: 1. Adjust handbrake lever linkage. Refer to para 13-7. 2. Put spare wheel back on truck. Refer to TM 9-2320-209-10. END OF TASK 13-36