TM 9-2320-209-20-3-2 FRAME 5 1. Put plate (1) under axle housing (2) with hole for shock absorber to back of truck. 2. Put two U-bolts (3) over saddle (4) and through holes in plate (1). 3. Using 1 1/16-inch wrench, screw on four nuts with lockwashers (5). 4. Using 1 1/16-inch socket and 3/4-inch square drive torque wrench, tighten nuts (5) to 170 to 180 pound-feet. GO TO FRAME 6 17-10