TM 9-2320-209-20-3-2 FRAME 2 Soldier B 1. Put eye of spring (1) in hanger (2) and aline holes. NOTE If needed, use hydraulic jack to move axle housing up or down to aline holes. Soldier A 2. Put in pin (3). 3. Using socket wrench handle and screwdriver bit, turn pin (3) until slots in pin aline with holes in hanger (2). Put in two screws (4). 4. Using 9/16-inch wrenches, screw on and tighten two nuts (5). GO TO FRAME 3 17-7