TM 9-2320-209-20-3-2 FRAME 7 1. Put hook bolt (1) through bar assembly (2). Make sure that hood bolt is in both holes of bar assembly. 2. Put cotter pin (3) through hole in hook bolt (1). Using pliers, spread open ends of cotter pin. 3. Put other end of hook bolt (1) through hole in bar assembly (4). Screw on sleeve nut (5). 4. Do steps 1, 2, and 3 again for hook bolt (6). NOTE Follow-on Maintenance Action Required: Replace spare wheel carrier. Refer to para 16-9. END OF TASK 16-47