TM 9-2320-209-20-3-2 FRAME 3 1. Put support (1) on cab support (2) and member (3) and aline screw holes. 2. Put four screws (4) through screw holes in support (1). Using 9/16-inch wrenches, screw on and tighten four nuts (5). 3. Put bracket (6) in place and aline holes. Put two screws (7) through holes in bracket and support (1). Using 9/16-inch wrenches, screw on and tighten two nuts (8). GO TO FRAME 4 16-43