TM 9-2320-209-20-3-2 FRAME 2 1. Put ends of cable (1) through holes in pickup member (2) on side where nuts (3) are. Twist cables around each other for almost the width of the pickup member. 2. Put U-bolts (4) through holes in pickup member (2) so cables (1) are caught. 3. Put lockwashers (5) on two U-bolts (4). Using wrench, screw on and tighten nuts (6). NOTE Follow-on Maintenance Action Required: Put spare wheel carrier back on truck. Refer to para 16-7. END OF TASK 16-24