TM 9-2320-209-20-3-2 16-8. SPARE WHEEL CARRIER REPAIR (ALL TRUCKS EXCEPT TRUCK M342A2). TOOLS: 7/16-inch wrench Pliers Leather gloves SUPPLIES: None PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. NOTE Repair of spare wheel carrier is limited to replace- ment of damaged parts. a. Preliminary Procedure. Remove spare wheel carrier from truck. Refer to para 16-7. b. Disassembly. FRAME 1 1. Turn pick-up member (1) with cable (2) attached so nuts (3) are facing up. 2. Using 7/16-inch wrench, unscrew and take off four nuts (3), four lockwashers (4), and two U-bolts (5). WARNING Always wear leather gloves when handling cable. Do not let cable run through hands. Broken or rusty wires can cause serious injury to personnel. 3. Pull ends of cable (2) out of holes in pick-up member (1). GO TO FRAME 2 16-20