TM 9-2320-209-20-3-2 FRAME 2 1. Put pintle hook (1) on anvil (2) so part around pin (3) is flat on anvil. 2. Using center punch and hammer, stake pin (3) in three places (4). 3. Turn pintle hook (1) over so other side is flat on anvil (2). Using center punch and hammer, stake pin (3) in three places (4). NOTE Follow-on Maintenance Action Required: 1. Put pintle hook on truck. Refer to para 16-5. 2. Lubricate pintle hook. Refer to LO 9-2320-209-12/1. END OF TASK 16-16