TM 9-2320-209-20-3-2 15-7. DRAG LINK ASSEMBLY REMOVAL AND REPLACEMENT. TOOLS: Pliers Screwdriver bit SUPPLIES: None PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, rear wheels chocked. a. Preliminary Procedure. Jack up front of truck chassis. Put safety jacks under frame. Refer to Part 1, para 11-4. b. Removal. FRAME 1 1. Using pliers, take cotter pin (1) out of drag link (2). 2. Using screwdriver bit, unscrew adjusting plug (3) until it is out of drag link (2). 3. Do steps 1 and 2 again on other end of drag link (2). GO TO FRAME 2 15-22