TM 9-2320-209-20-3-2 FRAME 5 1. 2. 3. Using screwdriver, screw in screw (1) until it is lightly snug. Hold screw with screwdriver and using 3/4-inch wrench, tighten nut (2). Go to cab of truck and turn steering wheel back and forth one turn around the midposition. If there is a do follow-on drag. light drag at the midposition, the drag is good. If drag is good, maintenance action. If drag is not good, NOTE go to frame 6 to set Follow-on Maintenance Action Required: Replace drag link on pitman arm. Refer to para 15-7. END OF TASK 15-16