TM 9-2320-209-20-3-2 1. Using screwdriver, unscrew adjusting plug (1). Take out ball seat (2). 2. Turn steering wheel to aline large end of slot on drag link end (3) with ball on pitman arm (4). 3. Put slot in drag link end (3) onto ball of pitman arm (4). Put ball seat (2) into drag link end. Using screwdriver, screw in adjusting plug (1) until it is almost all the way in. 4. Lubricate drag link end (3). Refer to LO 9-2320-209-12/1. 5. Using screwdriver bit, screw in adjusting plug (1). Unscrew adjusting plug one half turn or less until cotter pin (5) can be put in. Using pliers, bend open ends of cotter pin. END OF TASK 15-11