TM 9-2320-209-20-3-2 14-10. REAR INNER AND OUTER WHEEL BEARINGS AND SEALS REMOVAL AND REPLACEMENT. TOOLS: Oil seal replacer, pn c-10937827 Medium ballpeen hammer 3/4 x 10-inch brass drift SUPPLIES: Artillery and automotive grease, type GAA, MIL-G-10924 Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Rear wheel bearing inner seal Clean rags PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedure. Remove rear hub and drum assemblv. Refer to para 14-9. b. Removal. NOTE Outer wheel bearing cone and seal during removal of rear wheels and are taken out drum assembly. 1. Using puller, pull bearing (1) off of wheel hub spindle (2). 2. Using puller, pull off seal (3). Throw away seal. GO TO FRAME 2 14-64