TM 9-2320-209-20-3-2 1. Check brake adjustment. Refer to para 13-9. 2. Replace rear wheels, but do not jack down truck. Refer to TM 9-2320-209-10. 3. While turning wheels (1) and using wheel bearing nut wrench, tighten adjust- ing nut (2) until wheels bind. 4. Using wheel bearing nut wrench, back off adjusting nut (2) 1/8 turn. 5. Put one hand on bottom and one hand on top of wheels (1). Push with one hand and pull with other hand. If wheel bearing (3) is adjusted correctly, wheel should have very little wobble. GO TO FRAME 4 14-61