TM 9-2320-209-20-3-2 14-6. FRONT WHEEL BEARING CONES AND SEALS REMOVAL AND REPLACEMENT FOR SERVICE. TOOLS: Portable bearing lubricator Hand grease gun Wheel bearing remover and replacer, pn 7082863 Drop light Prybar SUPPLIES: Artillery and automotive grease, type GAA, MIL-G-10924 Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Clean rags Hub bearing inner seal PERSONNEL: One EQUIPMENT CONDITION: Truck parked on level ground, engine off, handbrake set. a. Preliminary Procedure. Remove front wheel and brake drum assembly. Refer to para 14-4. b. Removal. FRAME 1 NOTE Outer wheel bearing cone is removed during front wheel and drum assembly removal. If bearing is tight, use prybar to loosen. 1. Take bearing (1) off spindle (2). 2. Take seal (3) off spindle (2) and throw away seal. END OF TASK 14-32