TM 9-2320-209-20-3-2 14-5. FRONT AND REAR HUB AND BRAKE DRUM ASSEMBLY REPAIR. TOOLS: 5/8-inch wrench Arbor press Brass hammer, medium Medium ballpeen hammer Wood blocks, 4 X 4 X 18 Brass drift inches (2) SUPPLIES: Dry cleaning solvent, type II (SD-2), Fed. Spec P-D-680 PERSONNEL: TWO EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedure. Remove hub and drum assembly. Refer to para 14-4 for front hub and drum assembly removal. Refer to para 14-9 for rear hub and drum assembly removal. b. Front Hub and Brake Drum. (1) Disassembly. Soldiers 1. Put drum (1) on top of two wood blocks (2) as shown. A and B Soldier A 2. Using 9/16-inch wrench, unscrew and take off ten nuts (3), ten washers (4), and inspection cover (5). 3. Using brass hammer, tap hub assembly (6) out of drum (1). GO TO FRAME 2 14-20