TM 9-2320-209-20-3-2 14-4. FRONT HUB AND BRAKE DRUM ASSEMBLY REMOVAL AND REPLACEMENT. TOOLS: 3/4-inch socket wrench 8-ounce ballpeen hammer 1/4-inch drive pin punch Portable bearing lubricator Grease gun 3/4-inch wrench Wheel bearing nut wrench, pn 7076869 Torque wrench, 150 pound-feet capacity 10-inch socket handle SUPPLIES: Drive flange gasket Artillery and automotive grease, type GAA, MIL-G-10924 PERSONNEL: Two EQUIPMENT CONDITION: Truck parked on level ground, engine off, handbrake set. a. Preliminary Procedure. Jack up and remove front wheel. Refer to TM 9-2320-209-10. b. Removal. 1. Using 3/4-inch wrench, unscrew and take off eight capscrews and eight lock- washers (1), flange (2), and gasket (3). Throw away gasket. GO TO FRAME 2 14-11