TM 9-2320-209-20-3-2 FRAME 3 1. Put anchor screw (1) through outer brakeshoe (2). Put spacer washer (3) on anchor screw and put screw through hole in bracket (4). 2. Using 6-inch ruler, check that brakeshoe (2) is flush with brake drum (5) or not more than 1/16 inch below brake drum. If brakeshoe is more than 1/16 inch below brake drum, add another spacer washer (3). 3. Screw jamnut (6) on anchor screw (1). Using 1 15/16-inch wrench, screw anchor screw into transfer case (7). Using 1 7/16-inch wrench, tighten jamnut (6) against transfer case. GO TO FRAME 4 13-16