TM 9-2320-209-20-3-2 1. Aline screw holes in air compressor governor assembly (1) with firewall (2). 2. Using 1/2-inch socket wrench and 5-inch extension, screw in and tighten two capscrews (3) and lockwashers (4). 3. Using 5/8-inch wrench, screw on and tighten two tube nuts (5). 4. Using 9/16-inch wrench, screw on and tighten tube nut (6). NOTE Follow-on Maintenance Action Required: 1. Close hood and right side panel. Refer to TM 9-2320-209-10. 2. Adjust air compressor governor. Refer to para 13-36. END OF TASK 13-263