TM 9-2320-209-20-3-2 FRAME 4 1. 2. 3. 4. GO Put gasket (1) and air compressor (2) on four studs in air compressor support (3). Put tachometer cable bracket (4) on stud (5) as shown. Using 11/16-inch wrench, screw on and tighten four washers (6) and nuts (7). Using 7/16-inch wrench, unscrew and take out capscrew (8). Put capscrew through tube clamp (9) and using 7/16-inch wrench, screw in and tighten capscrew. TO FRAME 5 13-245