TM 9-2320-209-20-3-2 FRAME 2 1. 2. 3. 4. 5. GO Using 1/2-inch wrench, unscrew and take out capscrew (1). Take tube clamp (2) off air compressor (3) and screw capscrew back into air compressor. NOTE Some models may have brace (4). Other models may not. Using 7/16-inch wrench, unscrew and take out capscrew (5). Take brace (4) off air compressor (3). Using 11/16-inch wrench, unscrew and take off four nuts (6) and washers (7). Take off tachometer cable bracket (8). Take air compressor (3) and gasket (9) off air compressor support (10) and out of engine compartment. Throw away gasket. TO FRAME 3 13-239