TM 9-2320-209-20-3-2 FRAME 3 1. Put bumper (1) and brake pedal lever (2) onto brake pedal (3). 2. Using 9/16-inch wrench, screw in and tighten washer (4) and screw (5). 3. Put rod yoke (6) into place and aline hole in rod yoke with holes in brake pedal lever (2). Put in clevis pin (7). 4. Using pliers, put cotter pin (8) into inner hole and bend open ends of cotter pin. GO TO FRAME 4 13-141