TM 9-2320-209-20-3-2 FRAME 5 1. Put shield (1) in place, alining two holes. 2. Using 5/8-inch socket wrench, screw in and tighten two NOTE Follow-on Maintenance Action Required: screws (2). 1. Bleed brake hydraulic system. Refer to para 13-15 and 13-16. 2. Check air system for leaks. Refer to Part 1, para 1-5. 3. Check service brake operation. Refer to TM 9-2320-209-10. END OF TASK 13-116