TM 9-2320-209-20-3-2 (b) Multiple tee fitting NOTE Multiple tee fitting on brake hydraulic line on left rear axle is used for this typical procedure. 1. Using 7/8-inch open end wrench, hold multiple tee fitting (1). Using 1/2-inch open end wrench, unscrew and take off adapter (2). 2. Using 7/8-inch open end wrench, hold multiple tee fitting (1). Using 7/16- inch combination box and open end box wrench, unscrew and take off two tube nuts (3). 3. Using 9/16-inch open end wrench, hold self-locking nut (4). Using 9/16-inch open end wrench, unscrew and take out capscrew (5). Take off multiple tee fitting (1). END OF TASK 13-95