TM 9-2320-209-20-3-1 1. Put boot wrench, NOTE On left side of truck, two nuts hold top of boot guard (1). On right side of truck, two screws (3) hold top of boot guard. In this frame they are called fasteners. guard (1) in place. Put lockwasher (2) on and using 7/8-inch screw on and tighten two fasteners (3). 2. Put lockwashers (4) on screws (5) and using 7/8-inch wrench, screw in and tighten screws. 3. Put screw (6) through bracket (7) and boot guard (1). Using 9/16-inch wrenches, screw on and tighten nut (8). END OF TASK 11-24