TM 9-2320-209-20-3-1 Section III. STEERING MECHANISM 11-6. STEERING KNUCKLE BOOT REMOVAL AND REPLACEMENT. NOTE This task is the same for the left and right side of the truck. TOOLS: 7/8-inch wrench 9/16-inch wrench (2) Knife 11/32-inch wrench Flat-tip screwdriver SUPPLIES: Kit (composed of steering knuckle boot and tube of cement) Fine safety wire, MS-20995E PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Removal. FRAME 1 1. Using 9/16-inch wrenches, unscrew and take out screw (1) and nut (2). Bracket (3) will now be free of boot guard (4). GO TO FRAME 2 11-18