TM 9-2320-209-20-3-1 FRAME 8 1. Using chalk, put mark on clutch pedal shaft (1) where shaft meets floor ( 2). 2. Using hand, push clutch pedal (3) down until resistance is felt. While still holding down pedal, put another chalk mark on pedal shaft (1) where shaft meets floor (2) . 3. Let go of pedal (3) and measure distance between two marks (4) using a 6-inch ruler. Distance (free pedal travel) should be 1 1/2 to 2 inches. 4. If free pedal travel is not 1 1/2 to 2 inches, do clutch adjustment procedure. Refer to para 3-3e. NOTE Follow-on Maintenance Action Required: 1. Tell direct support maintenance to put- power takeoff on transmission. 2. Fill transmission with fluid. Refer to LO 9-2320-209-12/1. 3. Put on accelerator linkage. Refer to para 4-29. END OF TASK 3-14