TM 9-2320-209-20-3-1 1. Put four locking straps (1) over four bearing caps (2). 2. Screw Using 3. Using heads 4. Using eight bolts (3) through locking straps (1) and bearing caps (2). 9/16-inch wrench, tighten bolts. screwdriver, bend up eight locking strap lugs (4) against bolt (3). NOTE If universal joint binds, tap bearing caps lightly. This will relieve pressure on journal ends. grease gun, lubricate universal joint. Refer to LO 9-2320-209-12/1. END OF TASK 10-26