TM 9-2320-209-20-3-1 FRAME 5 1. Place yoke (1) on wood block as shown. NOTE Diameter of drift pin punch should be just a little smaller than diameter of journal. 2. Center drift pin punch (2) on face of journal (3) as shown. Tap drift pin punch lightly with hammer until bottom bearing (4) is driven out. 3. Tilt spider (5) to one side and lift spider out of yoke (1). 4. Take four gaskets (6) and four retainers (7) off four journals in spider (5). Throw away gaskets and retainers. END OF TASK 10-19