TM 9-2320-209-20-3-1 FRAME 2 1. Place one side of yoke (1) on block of wood as shown. NOTE When prying off bearing cap (2), cap may break. If bear- ing cap (2) breaks, take off other bearing cap (3) and go to frame 3. 2. Using hammer and chisel, pry off bearing cap (2). 3. Turn yoke (1) over and do step 2 again to take off other bearing cap (3). 4. Tilt spider (4) to one side and lift spider out of yoke (1). GO TO FRAME 3 10-16