TM 9-2320-209-20-3-1 FRAME 2 NOTE Soldier A stands under truck and watches reverse shift rod lever (1) to see if it moves when soldier B shifts transmission. Soldier A 1. While watching reverse shift rod lever (1), tell soldier B to shift transmission into all gears except R (reverse). Soldier B 2. Put FRONT TRANSMISSION shift lever (2) in position N (neutral). Soldier A 3. If reverse shift rod lever (1) moved, reverse shift rod (3) must be shortened as follows: a. b. c. Soldier B 4. Put Using 3/4-inch wrench, loosen jamnut (4). Using 7/16-inch wrench on flat section of reverse shift rod (3), screw rod into yoke (5). Using 3/4-inch wrench, tighten jamnut (4) against yoke (5). FRONT TRANSMISSION shift lever (2) in position 1 (first gear). 5. Do steps 1 through 3 again as needed. Reverse shift rod lever (1) should be almost ready to move when FRONT TRANSMISSION gear shift lever (2) goes into neutral (N) position. GO TO FRAME 3 9-47