TM 9-2320-209-20-3-1 FRAME 2 1. Put lower end of reverse shift lever (1) on pivot stud (2) as shown. Put flat washer (3) on pivot stud and using 3/4–inch wrench, screw on locknut (4). 2. Aline holes in clevis (5) with hole in transmission shifter shaft (6). Put bolt (7) through clevis and transmission shifter shaft. 3. Using 9/16-inch wrenches, screw on and tighten nut and lockwasher (8) On bolt (7). GO TO FRAME 3 9-42