TM 9-2320-209-20-3-1 Soldier A 1. From under truck, put lockout shaft (1) in bracket (2) from left side of bracket as shown. 2. Put lockout shaft lever (3) on end of lockout shaft (1) on right side of bracket (2). NOTE When lever on locknut shaft (1) is pointing up, lockout shaft lever (3) must point to rear of truck. Lockout shaft lever (3) should be almost horizontal. 3. Aline hole in lockout shaft lever (3) with hole in lockout shaft (1). Tell soldier B when ready. Soldier B 4. Working in cab, when soldier A is ready, using small hammer, carefully tap spring pin (4) into hole in locknut shaft lever (3). GO TO FRAME 3 9-17