TM 9-2320-209-20-3-1 g. Repair of Transmission Transfer Controls and Linkage. Repair transmission transfer controls and linkage by welding, straightening or replacing bent or damaged parts. h. Replacement of Transmission Transfer Shift Lever and Linkage (Trucks M49A1C, M49A2C, M50A1, M50A2, and M50A3. FRAME 1 1. Screw nut (1) and washer (2) on rod (3) and then screw yoke (4) NOTE Do not tighten nut (1) at this time. It will be tightened after setting length of rod (3) on transfer. GO TO FRAME 2 on rod. 9-8