TM 9-2320-209-20-3-1 f. Removal of Transmission Transfer Power Takeoff Shifting Lever Lockout Linkage (Trucks M49A1C, M49A2C, M50A1, M50A2, and M50A3). 1. Using needle nose pliers, take cotter pin (1) out of straight headed pin (2) and take out straight headed pin. NOTE Some model trucks have setscrew holding pin in forward end of control rod (3) instead of cotter pin (4). If so, unscrew setscrew to take off control rod. 2. Using needle nose pliers, take cotter pin (4) out of swivel pin (5). Hold con- trol rod (3) while taking out swivel pin and take off control rod. 3. Let swivel pin (5) hang on speed control wire (6) until control rod (3) is put back on truck. GO TO FRAME 2 9-5