TM 9-2320-209-20-3-1 d. Replacement. 1. Put switch bracket (1) in light housing (2) and aline holes. 2. Using screwdriver, screw in and tighten two screws (3) and washers.(4). 3. Put switch (5) on switch bracket (1). Put switch retainer (6) over switch and aline holes. 4. Using screwdriver, 5. Plug electrical lead screw in and tighten two screws (7). (8) into connector (9). NOTE Follow-on Maintenance Action Required: Replace floodlight sealed beam. Refer to para 7-39. END OF TASK 7-256