TM 9-2320-209-20-3-1 FRAME 2 1. Pull plug (1) out of connector shell (2). Slide shell back on horn wire (3) as shown. 2. Take off slotted washer (4) and slide shell (2) off horn wire (3). 3. Take rubber bushing (5) out of steering gear box (6). Slide rubber bushing off horn wire (3). NOTE Safety wire must be long enough to reach the other end of steering column, plus two feet. 4. Fasten a length of light safety wire (7) to end of horn wire (3). GO TO FRAME 3 7-191