TM 9-2320-209-20-3-1 c. Replacement. 1. Put a thin coating of heat resistant sealer on threads (1) of oil pressure transmitter (2). 2. Using 3/4-inch wrench, screw oil pressure transmitter (2) into adapter fitting (3). Using 3/4-inch wrench to hold adapter fitting from turning on elbow (4). 3. Plug connector (5) into oil pressure transmitter (2). NOTE Follow-on Maintenance Action Required: 1. Check operation of oil pressure gage. Refer to TM 9-2320-209-10. 2. Check oil pressure transmitter fittings for oil leaks. 3. Replace air cleaner filter element. Refer to TM 9-2320-209-10. END OF TASK 7-184