TM 9-2320-209-20-3-1 c. Replacement. 1. 2. 3. Put a thin coating of sealer compound on threads (1) of temperature trans- mitter (2). Using 15/16-inch wrench, screw in and tighten temperature transmitter (2) into hole in intake manifold (3). Plug connector (4) into temperature transmitter. NOTE Follow-on Maintenance Action Required: 1. Fill cooling system. Refer to para 6-10. 2. Check that operation of water temperature gage. Refer to TM 9-2320-209-10. 3. Check temperature transmitter for leaks. 4. Close hood and right side panel. Refer to TM 9-2320-209-10. 5. Reconnect battery ground cable. Refer to para 7-58. END OF TASK 7-182