TM 9-2320-209-20-3-1 FRAME 2 1. Aline threaded screw holes in rear composite light (1) with holes in bracket (2). 2. Using wrench, screw in and tighten two capscrews (3) with two star- washers (4). 3. Put capscrew (5) through bracket (2). Put wire clamp (6) over four wires (7) and put wire clamp on capscrew. 4. Using wrenches, hold cap screw (5) and screw on and tighten nut (8). 5. Plug in four wires (7) into four connectors (9) as tagged. Take off tags. END OF TASK 7-170