TM 9-2320-209-20-3-1 7-39. FLOODLIGHT SEALED BEAM REMOVAL, REPAIR, AND REPLACEMENT. TOOLS: Flat-tip screwdriver SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Contact cleaner, MS 230 PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, light switch in OFF position. a. Removal. FRAME 1 1. Using screwdriver, unscrew and take out three screws (1). 2. Pull light door (2) with sealed beam (3) away from light body (4). 3. Using screwdriver, unscrew and take out two screws (6). Take off two electrical leads (5). 4. Take off light door (2) with sealed beam (3). GO TO FRAME 2 7-154